G.skill 4gb issue on GA-P35-DS3L rev2 latest bios

rhaezor

Distinguished
Oct 4, 2007
46
0
18,530
0
Hi all, I am trying to run the settings below, but it will not post. The mobo powers up, fans spin, and then turns off. It does this 2 or 3 times then it finally boots up and my memory timings go from Manual to Auto, then it boots up fine.

Here is my RAM:
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL5D-4GBPK - Retail
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231166








As you can see, my memory settings keep getting reset, here is what cpu-z shows



 

rhaezor

Distinguished
Oct 4, 2007
46
0
18,530
0
Ok I got them to post with some settings I found below. Figures right after I posted this I found something that worked :) Here it is for anyone else that it may help:

http://forums.tweaktown.com/f69/memory-timings-explained-w-suggested-timings-memset-vs-bios-27283/

Had to scroll down a bit


Performance Enhance = [Standard]

CAS Latency Time________________ 5
Dram RAS# to CAS# Delay_________ 5
Dram RAS# Precharge Delay_______5
Precharge Delay (tRAS)__________ 15


ACT to ACT Delay (tRRD)_________ 4
Rank Write to READ Delay________ 11
Write to Precharge Delay_________ 5
Refresh to ACT Delay______________ 52
Read to Precharge Delay__________ 6
Static tRead Value_______________ 10
Static tRead Phase Adjust________ Auto << Leave ALWAYS

System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.3V]
PCI-E OverVoltage Control_ [Normal]
FSB OverVoltage Control___ [+0.1V]
(G)MCH OverVoltage Control [+0.1V]
 

ASK THE COMMUNITY

TRENDING THREADS