G41m-le forum

[Rav3nous]

Hello,
I have recently bought this MB, and a new CPU; now I am not sure how to set the jumpers in order to use at best my CPU vs. DDR2 (CPU has fsb-1066 mhz, and DDR2 has fsb-667 mhz). Instructions in the manual are not quite clear, and I didn't find yet anything helpful. Could anyone of you help me, please? Much obliged! Lawrence.

 

[saaiello]

Um they haven't used jumpers to adjust CPU and ram function in a long time. The only jumpers that actually mean anything to you might be the reset cmos jumpers and some motherboards have jumpers for the USB ports to supply voltage during sleep states. Other then that everything is controlled by the bios.


I just looked at your board and the only jumpers you have are the ones i said there is the jumpers above the 12v 4pin CPU power connector and a reset cmos jumper next to the battery on the board.