g4400+h110 mobo overheating is it normal?

[maikugalan21]

system info:
ssd 240
seasonic 520gb active
4g ram
only stock fan
gtx 750 ti graphics card but its not the problem

the problem:
not playing
https://prnt.sc/kneutb

when playing with bandicam
https://prnt.sc/knf18p

btw,im playing rules of survival and using bandicam
PS: my b250m mobo with gtx 1050 ti also has stock fan only but didnt get this high on temp when playing even while streaming

 

[geofelt]

Not normal.

At idle, your cpu temperatures should be in the 10-15c. range over ambient.

I suspect your stock cooler is not mounted well or your case airflow is insufficient.
What is your case and fan arrangement?

If you take the case covers off does that help?

Nudge the cooler. It should not wiggle.
Look at the back of the motherboard.
All 4 pushpins should be through the motherboard and locked.

----------------how to mount the stock Intel cooler--------------

The stock Intel cooler can be tricky to install.
A poor installation will result in higher cpu temperatures.
If properly mounted, you should expect temperatures at idle to be 10-15c. over ambient.

To mount the Intel stock cooler properly, place the motherboard on top of the foam or cardboard backing that was packed with the motherboard.
The stock cooler will come with paste pre applied, it looks like three grey strips.
The 4 push pins should come in the proper position for installation, that is with the pins rotated in the opposite direction of the arrow,(clockwise)
and pulled up as far as they can go.
Take the time to play with the pushpin mechanism until you know how they work.

Orient the 4 pins so that they are exactly over the motherboard holes.
If one is out of place, you will damage the pins which are delicate.
Push down on a DIAGONAL pair of pins at the same time. Then the other pair.

When you push down on the top black pins, it expands the white plastic pins to fix the cooler in place.

If you do them one at a time, you will not get the cooler on straight.
Lastly, look at the back of the motherboard to verify that all 4 pins are equally through the motherboard, and that the cooler is on firmly.
This last step must be done, which is why the motherboard should be out of the case to do the job. Or you need a case with a opening that lets you see the pins.
It is possible to mount the cooler with the motherboard mounted in the case, but you can then never be certain that the push pins are inserted properly
unless you can verify that the pins are through the motherboard and locked.

If you should need to remove the cooler, turn the pins counter clockwise to unlock them.
You will need to clean off the old paste and reapply new if you ever take the cooler off.
----------------------------------------------------------------------------------

 

[maikugalan21]

thank god i thought id bought faulty mobo etc.. thanks dude you made my day 😀 i did what you said about the stock cooler on my pc and it worked there's really one that is out of place thank you very much!! 😀

i still do have a question why am i still bottleneck playing rules of survival do i need 2 4gb of ram? cuz i only use 1 thanks in advance 😀

 

[geofelt]

4gb may well be a problem.
Look in task manager /resource manager/memory and check the hard fault page statistics after you have a problem.
A shortage of ram will show up as hard faults per second. one per second will be a problem.

 

[maikugalan21]

i dont often get bottleneck now since that the overheating is fixed, but i still want to know if i need to add 1 more stick
https://prnt.sc/knivo5

 

[geofelt]

i dont often get bottleneck now since that the overheating is fixed, but i still want to know if i need to add 1 more stick
https://prnt.sc/knivo5

If you are going to keep many tabs of chrome open you certainly need more ram.
While gaming, you should close all the extra apps that you can.
You definitely have a meaningful hard fault rate.
The impact is vastly less because you have a ssd for the page file.

You need to make a decision on how you upgrade ram.
You could take a chance and add a second 4gb stick.
You would want to buy a stick similar to what you have as to speed, voltage and timings.
Intel is reasonably tolerant of different ram but your odds of success is less than 100%..
I might guess 90%.

Ram is sold in kits for a reason.
A motherboard must manage all the ram using the same specs of voltage, cas and speed.
The internal workings are designed for the capacity of the kit.
Ram from the same vendor and part number can be made up of differing manufacturing components over time.
Some motherboards, can be very sensitive to this.

The question to ask is what is my plan "B" if the new 4gb ram stick does not play nice with the old?
Do you return the new ram? or what..
To get 8gb of ram, you may have to buy a 2 x 4gb kit. anyway.
As an alternative, you could consider buying a similar spec single stick of 8gb which should work by itself.
If the old 4gb plays nice, you will have 12gb and 8 of the 12 will be operating in dual channel mode.

 

[maikugalan21]

if ram is not the problem of bottleneck then the cpu is too weak?
or the gpu is faulty?
cuz i bought this product this week g4400 and gtx 750 ti are both used from aliexpress
and i got this problem earlier https://prnt.sc/knrnki
i dont know what's the cause