Hi!
I'm running a Hyper 212 EVO cooler with an AMD FX-6300 CPU.
My motherboard is GA-990XA-UD3 REV 3.0
I'm running the latest BIOS update version FEh
The problem is that after waking up from sleep the fan speed is only 300 RPM thus making the cpu heat up quite a bit.
The fan should be running from 600-1600 RPM.
Speedfan shows temperature for Temp3 as -128 celcius after waking from sleep mode but when booting normally from complete shutdown or waking from hibernate instead of sleep the temperature reads correctly and says around 18-30 celcius depending on the load.
I'm thinking that the system thinks the temp is -128 celcius thus slowing the fan speed down to 300 RPM.
And as stated before when booting up normally from a complete shutdown or waking from hibernate instead of sleep mode the temperature is around 18-30 celcius and the fan is spinning 800-1100 RPM and adjusting itself accordingly to the load.
I didn't find any settings in the BIOS that could affect this and this only happens when resuming from sleep.
The fan speed is set to normal mode in bios and mobo adjusts the speed depending on the load.
I have tried disabling hybrid sleep from power management settings but does not seem to have an effect.
PICTURES:
Here is speedfan after booting the computer from complete shutdown or from hibernate.
Everything is normal.
Here is speedfan after resuming the computer from sleep mode.
The Temp3 reading is now negative and fan speed is affected.
Any tips / suggestions?
QUICK EDIT:
My operating system is Windows 8.1
I'm running a Hyper 212 EVO cooler with an AMD FX-6300 CPU.
My motherboard is GA-990XA-UD3 REV 3.0
I'm running the latest BIOS update version FEh
The problem is that after waking up from sleep the fan speed is only 300 RPM thus making the cpu heat up quite a bit.
The fan should be running from 600-1600 RPM.
Speedfan shows temperature for Temp3 as -128 celcius after waking from sleep mode but when booting normally from complete shutdown or waking from hibernate instead of sleep the temperature reads correctly and says around 18-30 celcius depending on the load.
I'm thinking that the system thinks the temp is -128 celcius thus slowing the fan speed down to 300 RPM.
And as stated before when booting up normally from a complete shutdown or waking from hibernate instead of sleep mode the temperature is around 18-30 celcius and the fan is spinning 800-1100 RPM and adjusting itself accordingly to the load.
I didn't find any settings in the BIOS that could affect this and this only happens when resuming from sleep.
The fan speed is set to normal mode in bios and mobo adjusts the speed depending on the load.
I have tried disabling hybrid sleep from power management settings but does not seem to have an effect.
PICTURES:
Here is speedfan after booting the computer from complete shutdown or from hibernate.
Everything is normal.
Here is speedfan after resuming the computer from sleep mode.
The Temp3 reading is now negative and fan speed is affected.
Any tips / suggestions?
QUICK EDIT:
My operating system is Windows 8.1