GA-H61N-USB3 + MSI GTX 770 4GB + SG07 PSU 600W + Intel I5 2400

[cheezhen]

Hello!
As stated above, can
GA-H61N-USB3 blend with -
GTX 770,
Sugo SG07 600W PSU,
i5 2400
and 8GB DDR3 1333?

There are the components which I think may cause problems. So I need EXPERTS....

My itx case link with bundled PSU details: http://www.silverstonetek.com/product.php?pid=261

MOBA's link:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128526

My moba has only PCI-E 2.0 x16 while Gtx 770 is PCI 3.0 x16. Will they blend??

While my PSU is 600W and my target GPU is GTX 770W 4GB, so my question is will there be enough power?

Problem's Origin:
I am gonna upgrade my GPU from Geforce GTX560 Ti to 770. 4GB for future SLI as I will soon change to a Tower Chassis in about 2-4 years. I have to try my best not to upgrade other components due to budget constraints.

Thanks in Advance! Cheers!!

 

[maurelie]

Your PSU can handle GTX 770, but do not plan on SLI, because you will have to change motherboard ,PSU and case. I am little skeptical will the GPU fit in your case. Btw i have 3.0 PCI GPU on 2.0 PCI and it works just fine.

 

[cheezhen]

Your PSU can handle GTX 770, but do not plan on SLI, because you will have to change motherboard ,PSU and case. I am little skeptical will the GPU fit in your case. Btw i have 3.0 PCI GPU on 2.0 PCI and it works just fine.

I see. I am not going to change the motherboard, PSU and case when I am going to SLI but I will buy a new Tower Chassis with all the new components and I will leave this current mini-ITX for other purpose instead. So no worries,

Thanks for the insight. My SG07 can accommodate up to 12.2" long GPU, so I don't think the length will be an issue. Do you think the height and width will be ok?

Besides, will my processor be BOTTLENECKED with the 770 4GB GPU?

 

[maurelie]

Processor will be just fine, i don't think it will bottleneck GTX770. If the case can fit 12.2 card in length, then the width should not be a problem.