ga x99 ud4 beep code list: 1 short 5 long

[weichsem]

I can't seem to find the beep code list for the Gigabyte x99 ud4 anywhere. I am getting 1 short beep followed by 5 long ones and am running out of things to try. Anybody know where I can find the beep code list? I think this is bios dependent, I see the list for award bios on the gigabyte site but nothing about the uefi dualbios that I think my board has

 

[alexoiu]

Check http://www.overclockers.com/forums/showthread.php/748806-Beep-Codes-for-a-gigabyte-MB
See if it's the same issue (reseat the CPU and check the socket for bent pins)

 

[n337z]

You are not the only one.

We've got a UD3, and the problem arose after we exchanged the memory and reseated the two 6-pin wires for the VGA, to make it draw from two different cables instead of one; this was all voluntary.
Since then we have this error.
We tried the CPU on a UD4, and trialed all RAM banks with two different sets of ram. The same error arose with the UD4
It is totally puzzling.

I can nether confirm the board uses AWARD Bios, but if it does, it damn looks like the CPU is the problem.

http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=816

"5 short beep ：CPU error"


Any luck?