Gaming computer problem

[anthonyc821]

So I built my computer and I tried to start it up (most obvious way, by pushing the start button on my computer case) and it didn't start up at all. None of the fans moved. Then I look behind my motherboard and I see that my two orange and yellow Ethernet lights are on and my gaming keyboard lights are on. I don't know why it won't turn on. I tried flipping the front panel cables the other way that they were and still didn't turn on. I tried to jump start it (I don't know if I did it right or not) by connecting the positive and negative pins of the start button pins. Can someone help me? Is it my start button?

 

[BadActor]

Go through the checklist below and double check everything first. Jumping the two pwr pins on the motherboard should have made it start if nothing else was wrong.

http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

 

[Dark Lord of Tech]

Specs ?

 

[anthonyc821]

Specs ?

CPU: I5 4690k
Motherboard: Gigabyte GA-Z97X-UD3H
RAM: 8 gb (2x4) G. Skill
PSU: EVGA GQ 650w Gold+
GPU: MSI GTX 960 2gb

 

[anthonyc821]

Go through the checklist below and double check everything first. Jumping the two pwr pins on the motherboard should have made it start if nothing else was wrong.

http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

So I got it jumpstarted outside of my computer case. it stayed on and after I put everthing back into my case the fans would spin for a second and stop. The only thing that is on is the start button light and it doesn't turn off unless I switch off my power supply. I don't know why it's doing that, but i'm guessing that it's shorting some how. I think it's from a missing stand off in which there is no hole for the stand off in my case.

 

[BadActor]

Try in the case without the GPU or drives.

 

[anthonyc821]

[video="https://www.youtube.com/watch?v=afpUY8oRv-0"][/video]

Try in the case without the GPU or drives.

I just tried it and it's doing the Same exact thing as I said. It turns on for a second then stops. The start button light stays on though