Archived from groups: alt.sys.pc-clone.gateway2000 (
More info?)
If it is just a Solo 9300 (not one of the variants; 9300VE, Pro 9300-E),
then this should be a 3com miniPCI modem.
The Solo 9300 support page is here;
http://support.gateway.com/s/Mobile/Solo_Series/P9300/p9300nv.shtml
and the drivers page is here;
http://support.gateway.com/support/drivers/search.asp?st=pn¶m=3500545
Nothing shown for XP, but then that's not unusual for a non-OEM
supplied/supported OS. XP should have it covered in it's drivers listings.
KC
"Ed" <ekirstein_atcatskill.net> wrote in message
news:118o1mg34t8hf74@corp.supernews.com...
> This is a laptop Solo 9300 we are talking about.
>
> "Tom Clydesdale" <t.clydesdale.nospam@comcast.net> wrote in message
> news:c6adnYlv4eoszhbfRVn-qw@comcast.com...
> > You could also try moving the modem to a different pci slot. Sometimes
a
> > change will correct the problem.
> >
> > "Kevin Childers" <wildthing123@charter.net> wrote in message
> > news:b2Iie.2259$eR.1070@fe05.lga...
> > > That could indicate that those two items are in conflict over use
of
> > > resources on your machine. You might try deleting the "Other Devices"
> one
> > > and rebooting. If you get a new hardware found try following it and
see
> > > if
> > > that solves the issue. Alternatively you could kill the process and
let
> > > your systems boot to see if the warning clears on your modem.
Usually
> > > you
> > > get this situation when two (or more) devices are set to the same
> > > interrupt
> > > or memory range.
> > >
> > > KC
> > >
> > > "Ed" <ekirstein_atcatskill.net> wrote in message
> > > news:118ksp0pod9i1ee@corp.supernews.com...
> > >> I'm not sure if its totally a modem driver problem. I get two
devices
> > > with
> > >> yellow warnings in the system device list. One for the modem and one
> for
> > >> "Other devices" I wonder if this might be the pci bus that the modem
> > >> sits
> > >> on. I can't find a driver to take care of that device.
> > >> Ed
> > >>
> > >> "Kevin Childers" <wildthing123@charter.net> wrote in message
> > >> news:wmmie.159$eR.130@fe05.lga...
> > >> > What make and model of modem? Have you tried the OEM site? Some
> have
> > >> > drivers on their site that for some reason never seem to appear in
> web
> > >> > searches.
> > >> >
> > >> > KC
> > >> >
> > >> > "Ed" <ekirstein_atcatskill.net> wrote in message
> > >> > news:118er1jqrjboh8a@corp.supernews.com...
> > >> > > I upgraded my Solo 9300, not sure of the bios version. Its a P2,
> > >> 400MHz.
> > >> > > Only problem I have had, is I can't find a driver that works with
> the
> > >> > phone
> > >> > > modem. Everything else works fine.
> > >> > > Ed
> > >> > >
> > >> > > "davesid" <davesid@mail.tele.dk> wrote in message
> > >> > > news:42827ff2$0$184$edfadb0f@dread11.news.tele.dk...
> > >> > > > Hi all
> > >> > > > anyonye out there who can help me out trying to put winxp on
but
> > > need
> > >> to
> > >> > > > update the bios and can not find my chasis number listed its
> > >> > > > 3500724
> > >> > > anyone
> > >> > > > know whick bios version i should be using
> > >> > > >
> > >> > > >
> > >> > >
> > >> > >
> > >> >
> > >> >
> > >>
> > >>
> > >
> > >
> >
> >
>
>
Facebook
Twitter
Instagram