GeForce6100PM-M2 won't overclock :(

[mitchellvii]

Hi,

I am running an AMD 6000+ on my new GeForce6100PM-M2 ECS MB. With this processor on previous Asus MB's I was able to get to 3.3 Ghz stable with ease. However, on this ECS board, if I go above 3.075 GHz, it won't boot.

I see that with this board you cannot increase the voltage at all. Is that the problem, am I doing something else wrong or does this board just suck?

P.S., Does ECS have a tech support phone number in the USA? I cannot find one.

 

[bobbknight]

It's a pretty lame board, with an even lamer chipset.

 

[bobbknight]

It's a pretty lame board, with an even lamer chipset.

 

[B-Unit]

Agree with the double post, I bought a 939 version of that chipset from Biostar, couldnt get more than about 50Mhz OC on the processor, just not built for overclocking.

 

[arama22]

i`m having the same mobo , whith a amd sempron 3200 + Manilla (1.8 Ghz stock)...i`m keeping i in 2.3 Ghz , whith ease........that`s means 400 Mzh.....and 2X512 Kingmax...and it work pretty well...
it`s quite a good motherboard