Question Getting BSOD/freezes under low load on new PC build ?

Nov 25, 2020
1
0
10
0
Hi, couple days ago I've built a new pc and I keep getting couple different BSOD while doing low load stuff like internet browsing, writing in notepad++, watching VLC videos. There were 2 or 3 times when there was no BSOD, but pc simply freezed and either I couldn't do anything or everything froze except for mouse, but after a few presses it froze too. Those BSOD and freezes happen 2-3 times a day in total.

I've tried reinstalling windows 2 or 3 times already, so I don't have the previous BSOD dumps, but the ones I remember were: "IRQL NOT LESS OR EQUAL", "DPC WATCHDOG VIOLATION", "PAGE FAULT IN NON PAGED AREA" (Dumps that I do have I attached to this post.)

I have already tried running memtest for all 4 passes (0 errors), OCCT benchmark tests (I run those for the default time only (30 mins - 1 hour)), Furmark for 30 mins or so. There were no erros, crashes or BSOD while running any of them.

Also tried those disk repair commands (repairhealth, restorehealth, scannow...). Installed all drivers - First all that I could get from windows updates, NVIDIA GPU drivers, then motherboard driver list and AMD drivers. Also, I didn't do any overclocking. Only yesterday I tried to update my bios to never version (I wasn't sure it was a good idea since my BIOS version was F2, this one was called F60c so i thought it might be a beta version, but still decided to try it out.) and enabled XMP to see if anything changes (it wasn't enabled ever till that point).

SPECS:
OS:
Windows 10 Home 10.0.19042 Build 19042.
CPU: Ryzen 5 3600
GPU: GTX 1650 Super
Motherboard: Gigabyte B450M H
RAM: G.Skill Ripjaws V 3200MHz 16GB (2x8GB)
SSD: Kingston A2000 500GB
HDD: TOSHIBA P300 4GB
PSU: Chieftec Proton BDF-600S 600W

3 dump files that I currently have: https://we.tl/t-hocE9PRrzq

Any suggestions? :)
 

ASK THE COMMUNITY

TRENDING THREADS