Getting the shim back on...

Titanion

Distinguished
Dec 8, 2002
1,489
5
19,295
Hmmmmmm... before I send my 9700 Pro back to ATI, I must get my shim back on... any suggestions on the best way to di this... I am sure there are five or so good ways, but which one of them is best?

<font color=red><b>NF7-S/Mobile Barton 2600+
211x11.5 1.824v SLK900A
1GB Corsair XMS PC3200
Sapphire 9500np@9700np</font color=red><font color=black>
NF7-S/Barton 2500+
200x11.5 1.76v
512MB XMS PC2700
XFX Ti4200
 

Titanion

Distinguished
Dec 8, 2002
1,489
5
19,295
What I have is Arctic Silver Thermal Adhesive... the kind that comes in two parts that you mix up... so just get a thin coat of this on the shim and try to line it up with where it was before I took it off...

Ya, that is waht I would have likely done left to my own devices...

Thanks for reinforcing that...

<font color=red><b>NF7-S/Mobile Barton 2600+
211x11.5 1.824v SLK900A
1GB Corsair XMS PC3200
Sapphire 9500np@9700np</font color=red><font color=black>
NF7-S/Barton 2500+
200x11.5 1.76v
512MB XMS PC2700
XFX Ti4200
 

TRENDING THREADS