Question Ghost Recon Wildlands(very low fps problem after m.2 ssd install)

rigger922

Reputable
Dec 7, 2018
167
3
4,765
Hello, Ladies and Gents so i purchased a Samsung 970 evo plus 500gb (NVMe M.2) and installed it yesterday afternoon had it all setup everything was golden, Then i copyed GRW over from my old ssd to the new drive and this is were my problem starts first with my fps going from 60-80fps to 30-50. After trying some solutions to no avail i posted on the forum and after some chats i realized i had installed my M.2 in my 2_2 slot instead of my 2_1 slot now i have switched it over and i am still having the same problem but now its worse i am at 10 fps in menus and around 30 fps locked in game.

List of thing i have tryed today with no positive outcome
  1. Verifyed game files
  2. Reinstalled Uplay
  3. Change graphics/video settings
  4. Updated GPU drivers
  5. Reinstalled GRW
  6. Moved the game back to older SSD(Same issue here)
  7. Updated all drivers including bios update and chipset update
  8. Made sure everything in my bios is as in should be(Default settings)
  9. Tryed three other games that all run as they should no problems
  10. Tested my temps/cpu/gpu usage
  11. Made sure windows 10 is up to date and all setting are correct
  12. Tryed all suggestions on Ubi forums removing joypads/peripherals etc
The only thing i have not tryed is removing the new m.2 and seeing if that makes a difference.
Please can you guys help

PC Specs
CPU- Ryzen 5 2600
GPU- GTX 980Ti 6GB
MB- MSI X470 GP
RAM- Corsair Veng 3000MHz
PSU- EVGA Supernova G2 800W
AIO- Corsair 110i GTX
Fan Controller- Corsair Commander
HDD- WD Black 1TB
SSD - Samsung 840 EVO 256GB(Boot Drive Currently)
M.2 - Samsung 970 EVO PLUS