So, I have an issue with heat in my machine. I'm running an Amd 8120, with 8gb memory, a coolermaster 700w silent pro, a galaxy gtx 570, with a 260 for physx (didn't have the cash for two 570's and my brother had an extra 260 sitting around) and its all wrapped up in a nice pretty haf-9 case.
I'm not sure the exact sizes on the fans in the case, but I'm guessing the one in the front is 120, the top vent is 240, and the one in the back is 80, not including the psu's vent in the back, so this thing should have good airflow. The motherboard also seems to default to 1.42 volts on the chip (everything is running stock, I don't want to have to replace any chips.) and at that setting, running prime95 I'll cap out at 68c, which seems a bit excessive. I dropped the voltage manually to 1.337 and that seemed to drop the idling temps and most load temps to within a reasonable rate (caps out at 50-55c)
My issue is with gaming. I very recently purchased borderlands 2, and left the CPUID hw monitor on while running it till it crashed again. this was the result I got.
that 108c (had peaked at 125c 😱 in the first test but was unable to get a screenie on that) has me very concerned. I've seen directions on how to replace the thermal paste on the northbridge, and intend on doing so, but if what I'm reading is correct, the northbridge is the tmpin2 which from what I've read, 80c is within standard operating temperatures (even so I would like to reduce that) I also plan on purchasing a hyper 212 heatsink/fan combination to see what I can do about the cpu.
Even so, it seems that parts of my system are running way too hot (gpu's are good.....) Does anyone know exactly where that temperature sensor is, (possibly sitting in between the two video cards, and overheats because of them??) and what, if anything, can I do about it? Or should I just look into RMAing my board, and get another one?
I'm not sure the exact sizes on the fans in the case, but I'm guessing the one in the front is 120, the top vent is 240, and the one in the back is 80, not including the psu's vent in the back, so this thing should have good airflow. The motherboard also seems to default to 1.42 volts on the chip (everything is running stock, I don't want to have to replace any chips.) and at that setting, running prime95 I'll cap out at 68c, which seems a bit excessive. I dropped the voltage manually to 1.337 and that seemed to drop the idling temps and most load temps to within a reasonable rate (caps out at 50-55c)
My issue is with gaming. I very recently purchased borderlands 2, and left the CPUID hw monitor on while running it till it crashed again. this was the result I got.

that 108c (had peaked at 125c 😱 in the first test but was unable to get a screenie on that) has me very concerned. I've seen directions on how to replace the thermal paste on the northbridge, and intend on doing so, but if what I'm reading is correct, the northbridge is the tmpin2 which from what I've read, 80c is within standard operating temperatures (even so I would like to reduce that) I also plan on purchasing a hyper 212 heatsink/fan combination to see what I can do about the cpu.
Even so, it seems that parts of my system are running way too hot (gpu's are good.....) Does anyone know exactly where that temperature sensor is, (possibly sitting in between the two video cards, and overheats because of them??) and what, if anything, can I do about it? Or should I just look into RMAing my board, and get another one?