Question Gigabyte aorus ultra gaming

[tm1996]

I’m trying to overclock my ryzen 7 1700x on this motherboard. Can someone give me a guide this board is so odd there’s no VCore only dynamic dvid and I don’t even know what it means. My voltage says I’m at 1.548 which is WAY too high for this chip

 

[tm1996]

I want a safe voltage like 1.4v etc

 

[tm1996]

My offset is only +0.204

 

[tm1996]

No matter what settings I use everything still says my cpu is running at 1.548-1.560vcore event at stock after resetting bios. Cpu z shows the same thing ?

 

[drea.drechsler]

No matter what settings I use everything still says my cpu is running at 1.548-1.560vcore event at stock after resetting bios. Cpu z shows the same thing ?

What does HWInfo64 show? Look at the reading: Core voltage (SVI2 TFN). That's the actual core voltage the processor reports.

VCore is usually higher than that, how much depends on how the motherboard reports it and the processor load. It could be reading from directly at the output of the VRM before any droop occurs as the current goes through the motherboard and socket circuitry.