Question Gigabyte Aorus Z590 Ultra motherboard RAM issue

Apr 21, 2022
1
0
10
0
Hi,

I've recently bought an Aorus Z590 Ultra motherboard. I'm using Kingston Fury Beast 3200MHz 64GB DDR4 RAM - KF432C16BBK2/64 and an Intel i7-10700K processor.

The memory sockets are laid out as follows:

A1 - A2 - B1 - B2

Recommended memory configuration when using 2 sticks is A2-B2 with A1 and B1 slots empty. Currently the PC boots up only when a single dimm is installed in either B1 or B2 slot. Upgrading BIOS to F6 didn't help. Nor did installing the system. I've tried all possible configuration, but as long as there's one dimm in one of A slots the system beeps one long beep every two seconds indefinitely. I tried different RAM (Corsair Vengeance 2x16GB). I tried resetting BIOS to factory settings. Is there anything else I can try before I proceed with an RMA?

Cheers!
 

ASK THE COMMUNITY