Gigabyte B360M D3H rev1

[ahillondankristian]

Hi Team,

I've recently recently updated my new Gigabyte B360M D3H BIOS from F3 to F4.
BIOS upgrade to F4 seems to be successful however after reboot, it keeps on looping to BIOS.

Tried the following:
-> Flash the BIOS to latest update
-> Reset the BIOS to default / "Optimize Setting"
-> Cleared CMOS
After I tried to rollback BIOS version to F3 and seems to be successful, computer shutdown.
Manually power on the PC and it won't POST anymore.

Isolated the PSU and confirmed working.

Please help, thank you.

 

[cin19]

Because the MB has dual BIOS, try this method to boot with the backup BIOS https://forums.tweaktown.com/gigabyte/33904-fix-dead-dual-bios-motherboard-flashing-failed.html

If you can boot into the BIOS, check the boot order, make sure the boot device is the 1st boot device.

Otherwise you will need replace the BIOS chip.

 

[ahillondankristian]

Because the MB has dual BIOS, try this method to boot with the backup BIOS https://forums.tweaktown.com/gigabyte/33904-fix-dead-dual-bios-motherboard-flashing-failed.html

If you can boot into the BIOS, check the boot order, make sure the boot device is the 1st boot device.

Otherwise you will need replace the BIOS chip.

thank you cin19 for the prompt response.
will check the link now