Question Gigabyte B650M D3HP no speaker post message or video signal

[Razvan1985]

Hello

I made a new PC using a B650M D3HP, Ryzen 5 7600, Corsair Vengeance 16GB DDR5 5200MHz CL40 Dual Channel Kit, Asus 1070 8Gb.

When i start the PC i can see everything powering on, but i don't hear the speaker beeping once to validate that the system is ok, and there is no video signal.

If i remove the ram i can hear the speaker beeping. I tried every ram slot ( 1 and 2 dims) nothing helped, i unplugged most of the stuff that require power.

If i update the BIOS - using the q flash option will that do anything ?

What else can i do or try ?

The GPU works since I'm using this in another configuration - B350M plus, with Ryzen 5 2600, 32Gb ram...etc and everything is good

 

[rgd1101]

brand and model of the psu?
take the 1070 out and test with igpu?

 

[Razvan1985]

yes i tried with the GPU removed, nothing

psu - https://www.njoy.global/product/theta-650 i know its not the best but my old one stopped working and had to grab what i could since its week-end.

on the old pc im using 3 HDD and in full load i have no issue with the PSU

did bios update using the q flash option - no chance at all