Gigabyte Front panel header issue

[warrenwaddell]

So I'm setting up a motherboard (Gigabyte GA-970A-UD3P) and I'm stuck on getting the Case switches cables connected properly. The case cables are labeled and color coordinated, yet they do not match my motherboards color scheme or label. I had this problem last time I set this motherboard up and I took it to a PC repair tech and he moved the power switch and it worked fine. I just don't remember where he placed it since it was a year ago. Can someone please help me figure out the proper order?!? I've tried matching the colors, and I've tried matching the labels. Always the right polarity as well.

[/img]

[/img]

[/img]

 

[BadActor]

Download the motherboard manual for your board if you don't already have it. Page 25 show the front panel port layout and where you need to connect each of the front panel connectors.

http://www.gigabyte.com/products/product-page.aspx?pid=4717#manual

 

[warrenwaddell]

Download the motherboard manual for your board if you don't already have it. Page 25 show the front panel port layout and where you need to connect each of the front panel connectors.

http://www.gigabyte.com/products/product-page.aspx?pid=4717#manual

That's where the issue is. I have the manual and the colors and labels from my case to my MOBO don't add up. They are all sorts of wonky. I'm just wondering if there's a special way I'm supposed to wire these up or do I just send back my case to new egg and get a new one.

 

[BadActor]

I would disregard the colors and attach the connectors to the pins identified on the diagram. The connectors should be marked something like PWR+, PWR-, RST+, RST- and so on.