Gigabyte GA-MA785GM-US2H Cpu

[Abel_4]

not recognize me athlon x3 x3 440 or 555 processor phenom , but this works perfect with me athlon le- 1640 can help me please

 

[cin19]

Because you don't list which MB you had, but I think you should update the BIOS, like for the rev1.1 the le-1640 needs F6 version BIOS, but either x3 440 or 555 needs F7. And if you have other version MB like rev3.3 the problem maybe from the x3 cpu or something else, because all of them need F8 so that the BIOS is not the problem. So make sure which one you had, 1.0, 1.1, 1.3, or 3.3
Rev1.1 http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=3266
Rev3.3 http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=3447

 

[Abel_4]

thanks for answering, look I have the Rev1.1, had the bios f7 and was the same still did not work for me in phenom athlon x3 and if you then go down to the version of bios f6 to see and still the same, but when I test the phenom x3 in another motherboard me works perfect, recognizes once

 

[Zerk2012]

The 440 should work with rev 1.1 and F7 BIOS not the 555 though.
Are you sure you have rev 1.1 it will be on the lower left corner of the board.
http://www.gigabyte.us/support-downloads/cpu-support-popup.aspx?pid=3266

 

[Abel_4]

if I'm sure is the Rev1.1, another fact it is that also tried to use the Athlon II X3 440 and no walks in this motheboard while another if it works, I've tried the Athlon II X3 440 and the Phenom X3 8450 and no of the two works I have it with bios f6 and so I put on the f6, with this motherboard from a friend is where I tested the processors, ASRock N68C-GS4