[SOLVED] Gigabyte GA-Z77M-D3H (1.0) new 1050TI CARD issues

[elpinchearbolquehabla]

I just purchased NVIDIA GTX 1050ti to upgrade my old gtx 550,

current system information:
motherboard "Gigabyte GA-Z77M-D3H (1.0)" .....OLD i know
Windows 10 Pro 64 bits
Intel i7-2600k 3.40 GHz
16 GB RAM DDR3
850 Watt CoolerMaster Silent Pro M
BIOS version F7

When I install the CARD it's stuck on the bios screen, NOT RESPONDING, several times.

I am figuring that since I'm on a pretty old BIOS Version, that may be the culprit, however, a couple questions, i checked the gigabyte site and i found several:
https://www.gigabyte.com/Motherboard/GA-Z77M-D3H-rev-10#support-dl-bios
I´m downloading the latest that´s not a BETA, which is the F13
If it's not the BIOS any thoughts on what I need to do?

Thank you for any thoughts.

A very similar question was asked by
Scott_172
on May 29, 2017, 6:57 PM
but he didn´t replied if it worked.

THANKS!!

 

[shknawe]

have you tried putting it in the other pci-e slot?

 

[shknawe]

Did you download the newer nvidia drivers before installing the card? The 1050ti needs drivers from at least jan 2016.

 

[elpinchearbolquehabla]

have you tried putting it in the other pci-e slot?

It only has one PCI X16 i think the other is x4,

 

[shknawe]

right it will work in both just making sure if its the card or the slot that may not be working.

 

[elpinchearbolquehabla]

GUYS I MADE IT WORK!!
THE BIOS UPDATE TO F15A (2013) worked fine, i have to wanr you that this is a BETA bios.. yes i know...
but it worked...
also tech people told me that GPU is not completely compatible with my i7 2600k because of the 128 bit of the GPU, they say is too much of a card for it..
well..
if i change CPU i need to change motherboard and RAM, so it´s not happening in a while.
THANK YOU GUYS..

 

[elpinchearbolquehabla]

right it will work in both just making sure if its the card or the slot that may not be working.

THANKS MAN, it was the BIOS, i went from F5 to F15a and it worked.. THANKS !!!