[SOLVED] Gigabyte GTX 770 Components

[Matska]

Hy !
Please , i need this components value , on my card is burned out.
I attached the picture.
Thanx !!!

https://imgur.com/a/j0INf6h

View: https://imgur.com/a/j0INf6h

 

[jay32267]

I can't tell you the value.
I can tell you they are probably capacitors.
If you remove one....you can measure it.
I would suspect all 6 are the same value.

 

[Matska]

I can't tell you the value.
I can tell you they are probably capacitors.
If you remove one....you may be able to measure it.
I would suspect all 6 are the same value.

Yes I know . 4 remained good, but the values do not match. Please tell me the correct values . Thank you !

 

[jay32267]

Yes I know . 4 remained good, but the values do not match. Please tell me the correct values . Thank you !

The values don't match each other?
I find that odd.
As far as the correct values...measuring one, is the only way I know of....without having the schematic.

 

[Matska]

The values don't match each other?
I find that odd.
As far as the correct values...measuring one, is the only way I know of....without having the schematic.

The highest value 11.5uF, the lowest 10.3uF, the others between the two .
How much can it be real? 12uF maybe ?!

 

[jay32267]

Capacitor values can vary like that
That is totally normal.
If you use a 10uF caps...I think they will work.

 

[Matska]

Capacitor values can vary like that
That is totally normal.
If you use a 10uF caps...I think they will work.

Thank You !

 

[jay32267]

Thank You !

You're welcome.
In general....there is usually a little leeway with capacitor values...as far as what you can get away with in the circuit..
...and in general....the tolerances aren't that tight on caps....nor do they need to be....because in many cases it isn't that critical.
If you use 10uF caps I think they will work.