This is a new system purchased last Week of December 2015, and I just notice this when I did a bios check. I read the manual and also some of the threads, but with no avail on the resolution eg. change the values in memory setting= but it's greyed out or lock, I did set the setting- Memory Enhancement Settings-Enhanced Stability, Memory Timing mode to manual, then used the Easytune, I was able to set or change the frequency to 13.33 to 16mhz.(which automatically change the values in ddr timing after restart) at first it's working fine, but after few restart I received a message " Boot failure detected" with 3 options to choose 1. Load Optimized defaults then boot 2. Load Optimized defaults then reboot 3.Enter Bios - I choose 1; now it's back on 1333mhz...., please help me with this issue?
Here is my rig:
Intel i3 core 6100@3.7ghz
Gigabyte H170M-D3H DDR3
G.Skill Ripjaws 2x 8(F3-12800CL10S-8GBXL)=16gb 1600mhz ddr3 CL10
Samsung SSD 850 Evo 250GB
WD Caviar Blue 1TB 7200RPM
Aerocool StrikeX 600w modular 80+plus Bronze
OS:Windows 10 64bit sp1
P.S.=Intel i3 6100 and Gigabyte H170M-D3H DDR3 stated it support 1600/1333 mhz memory modules.
Here is my rig:
Intel i3 core 6100@3.7ghz
Gigabyte H170M-D3H DDR3
G.Skill Ripjaws 2x 8(F3-12800CL10S-8GBXL)=16gb 1600mhz ddr3 CL10
Samsung SSD 850 Evo 250GB
WD Caviar Blue 1TB 7200RPM
Aerocool StrikeX 600w modular 80+plus Bronze
OS:Windows 10 64bit sp1
P.S.=Intel i3 6100 and Gigabyte H170M-D3H DDR3 stated it support 1600/1333 mhz memory modules.