gigabyte h81M D2V and i5 4460 bios issue

[RoslanSh]

• 
  hi all,
  i bought gigabyte h81M D2V and i5 4460. when i turned on PC i found i cant go into bios.
  after little research i found that refresh hasswell CPU on H81m d2v i need update bios to version f5. the issue is that i don't have other hasswel CPU to install only for bios update.
  do you have suggestion for another way to update bios?
  P.S
  important to mention i don't have boot drive with windows installed yet, well because BIOS dose not work and i cant install windows.

 

[alexoiu]

Hi, A local PC shop might help, or, you can return the board and choose different one.

 

[RoslanSh]

Hi, A local PC shop might help, or, you can return the board and choose different one.

it gives me error that no boot drive is detected and i cant access to bios
so is it possible:
if i connect hard drive with windows 7, is there chance it will boot to windows 7 ? and if so can i preform flash through windows?
because it gives me error that no boot drive is detected

 

[alexoiu]

So, it does POST? then the CPU is supported. Try inserting a bootable DVD/USB and test. A HDD with Windows pre-installed might work or not, depending on the old board.

 

[RoslanSh]

So, it does POST? then the CPU is supported. Try inserting a bootable DVD/USB and test. A HDD with Windows pre-installed might work or not, depending on the old board.

it posts but i cant get into bios, or choose boot order or Qflash by END.
i tried insert windows 7 DVD but i ait recognized it as bootebele drive.
BTW
why it depends on old board?

 

[alexoiu]

It would not load Windows if different drivers/chipset, installed in AHCI or IDE mode. You'd get BSOD.
What happens when starting the board? What messages getting?

 

[RoslanSh]

when i turn on PC the first thing what i get is " no bootable drive found please insert boot disk and press any key."
with windows 7 DVD same issue.
no post screen or bios massage.

 

[alexoiu]

Try tapping Del at restart, see if able to access the BIOS.

 

[RoslanSh]

tried Del(as written in manual) with no result :\ . i cant even see what bios version is :|

 

[alexoiu]

If clearing the CMOS (see the manual for how to), does the board wait for F1 at restart?

 

[RoslanSh]

thank you very much.
after clearing CMOS 4/5 Times in a row and changing keyboard issue solved.

 

[alexoiu]

Glad you've solved it.