Question GIGABYTE X470 Aorus Gaming 7 - RAID setting not working - What am I doing wrong?

Aug 21, 2019
4
0
10
0
Problem: I'm trying to set raid 0 up but it's not working.

I went into the Bios>Chipset>SATA Mode > Switched to RAID.

But when I save and restart computer, it doesnt give me the change to enter into the raid configuration menu (cntrl+ R), I dont see that screen anymore. It just loads directly into windows. The reason why I knew there was a config menu was because I saw it before when I was on an older Bios version. but now im on the most current version (f42a) and its not working.

Specs:
CPU:AMD athlon 200GE ( i have a 3700x but I'm trying to get this to work first)
GPU: evga gtx1080ti
Storage: SSD and HDD
Ram: G.SKILL Trident Z Royal Series 16GB (8gbx2) 3200 mhz

Pictures of my bios:
https://ibb.co/NNhgQ3N
https://ibb.co/5F5nQ8T
https://ibb.co/vdZsJS2
https://ibb.co/h8ZXN3z
 

Lutfij

Titan
Moderator
Disconnect the HDD from your system and please revert to the last known BIOS that isn't with an alphabetical suffix. You're currently on an alpha version of the BIOS, which can and will have issues.

See if enabling NVMe RAID mode helps you out. Also, make sure your data on Windows 10 is backed up in case you haven't already.
 
Aug 21, 2019
4
0
10
0
Disconnect the HDD from your system and please revert to the last known BIOS that isn't with an alphabetical suffix. You're currently on an alpha version of the BIOS, which can and will have issues.

See if enabling NVMe RAID mode helps you out. Also, make sure your data on Windows 10 is backed up in case you haven't already.
Nope, this didnt work. I reverted back down to f40 as that is the earliest id want to go since im about to install a 3700x, miniumum is f40 bios for the ryzen 3 support.

It seems like they enabled 3rd gen ryzen support and disabled RAID support. im not happy right now.
 

ASK THE COMMUNITY