Question Gigabyte z490 Vision D problem installing W10

[lince55]

I put together a new pc with a Gigabyte z490 vision d motherboard, I5 10400 CPU and a m2 WD black HD
. I cannot boot the pc from a pendrive to install Windows 10.
When I try to do it, the pc hangs.
Is it a problem with the BIOS setup?
will it be easier to boot from a dvd?
I will appreciate any advice you can give me.

Thanks in advancre and Beste regards

 

[Shjacks55]

Boot from USB is not always enabled in the BIOS settings. If light on USB blinks and then still hangs the pendrive isn't bootable, missing boot files.

 

[R3M28]

I put together a new pc with a Gigabyte z490 vision d motherboard, I5 10400 CPU and a m2 WD black HD
. I cannot boot the pc from a pendrive to install Windows 10.
When I try to do it, the pc hangs.
Is it a problem with the BIOS setup?
will it be easier to boot from a dvd?
I will appreciate any advice you can give me.

Thanks in advancre and Beste regards

Hi! I know this is a little late but did you manage to solve your problem? How?

I'm having the same issue with b550 vision d.

 

[lince55]

Hi friend. I already solved it.
You must create a portable USB pendrive with Rufus and boot the PC with it.. Then, install Windows normally.
You can download the Rufus from here:

Rufus - The Official Website (Download, New Releases)

Rufus is a small application that creates bootable USB drives, which can then be used to install or run Microsoft Windows, Linux or DOS. In just a few minutes, and with very few clicks, Rufus can help you run a new Operating System on your computer...

rufus.ie

Good luck!