Gigagbyte gaming K7 won't post

[peteblack]

Hi Folks.
First time builder and poster here, help needed please.
I recently bought a gaming k7 mobo and Ryzen 5 2600x. The pc didn't post due to the out dated bios so i bought an a5-900 chip and managed to update the bios to F23 and got a good post on the a5 chip. I've now refitted the 2600x and it's stuck in a loop with error code 0d.
Ram is G-skill 3200 optimised for Ryzen, I've tried different slots but still no joy, also tried the SSD (empty) in various sata terminals and also unplugged.
Any pointers will be very gratefully received.
Cheers.

 

[Lutfij]

First list your specs like so:
CPU:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:

Then state what BIOS version you were on prior to the update. You might want to try and remove the CMOS battery and replace it after 30 mins and see if you get any success in POSTing.

Moved thread from Motherboards to Systems.

 

[peteblack]

Hi again,
Noob mistake and I think it's OK now.
I forgot to pull the clip on the wraith cooler. Just got a good post but have to go out for a few hours. I'll report back later.
Wish me luck.
Many thanks Lutfij and apologies for wasting your time.
Just in case my specs are
Lian Li o11 dynamic
Gigabyte gaming K7
Ryzen 5 2600x
G-Skill F4-3200C14D-16GFX 16 GB
Samsung 500gb 860 evo
Zotac 1080ti amp extreme
EVGA 750w gold