[SOLVED] Gkill Not reaching 3600mhz

[drstrangelov]

Hi,

So thought I'd give my system an upgrade, managed to get a hold of one each of these:


F4-3600C18D-32GTZN
Trident Z Neo
DDR4-3600MHz CL18-22-22-42 1.35V
16GB


F4-3600C18D-32GTZR
Trident Z RGB
DDR4-3600MHz CL18-22-22-42 1.35V
16GB

They are practically the same, right? Well I can't get the PC to run them at 3600mhz. Crashes when I try something intensive like prime95.

Is there something I can do to set them up correctly, they are in A2 and B2 respectively. ODCP Is set to profile #1

 

[drstrangelov]

Forgot some details

Motherboard: Asus TUF Gaming B550-Plus
Processor: Ryzen 3700x

https://ibb.co/Zfzf70s

https://ibb.co/PMRsCGW

 

[sizzling]

Even if they were exactly the same model there was no guarantee they would work together without issues. Only RAM bought in a matched kit is guaranteed to work together. See odd man out section here https://forums.tomshardware.com/faq...y-ram-and-xmp-profile-configurations.3398926/

 

[gskill support]

@drstrangelov Do you have the latest BIOS? Try a lower DRAM Frequency to see what can work. Both kits should have same results when tested separately.