Question Glitches Always Show On AMD PC

[teh_supar_hackr]

I've been having this issue for the last two days. The PC will always show these glitch artifacts on screen. I tried re inserting the graphics card once, did'int work. Driver update, did'int do anything. Booting into Windows 10 black screens and freezes always when booting into once the Windows logo appears, and booting that SSD on another PC does boot fine. I feel like that is linked with the graphic card which I've been meaning to update, but don't have the money to. I got a new graphics card that was super cheep just to test the PC to see what the issue source is, and it's the graphics card originally in the PC as this new one inserted works as it should without any glitches. Too bad this working one is a low profile card with 1gb of memory on it, unlike me previous card which could play many newer games smoothly, and well. Guess I'll ether find some way to fix this glitched card, or save up for a much better card.

The PC is ATI, with most of it's parts being Corsair branded, with the motherboard being an Asus Sabertooth 990FX R2.0, with the processor being an 8-core AMD FX 8350 on a 64-bit machine. The PSU is a Corsair CX750m. Any more info I should put here? I don't know what the case is, but I use an SSD for booting in Windows 10.

Below is images if the issue.

https://imgur.com/a/c14iITh

And here is my graphics card.

https://imgur.com/a/6EuleQa

View: http://imgur.com/a/6EuleQa

View: https://imgur.com/a/c14iITh

 

[simonyeeklang]

Did you clean the connector of the GPU with a pencil eraser?
and make sure connector is plugged in peoperly.

 

[teh_supar_hackr]

Did you clean the connector of the GPU with a pencil eraser?
and make sure connector is plugged in peoperly.

An eraser you say? I usually clean contacts with rubbing alcohol and a cue tip. Btw I cleaned the contacts and inserted the graphics card, same thing. Here's an image of the card I have in it and is the only one I have period. It came with the pc.

https://imgur.com/a/6EuleQa

View: http://imgur.com/a/6EuleQa

 

[simonyeeklang]

Try cleaning the memory contact too. with the same idea.

 

[teh_supar_hackr]

Try cleaning the memory contact too. with the same idea.

I'm not exactly sure where that would be on the card.

 

[madmatt30]

What GPU is it meant to be?

Never seen powercolor branding on the fan side of a gpu, it normally on the power cable edge.

 

[teh_supar_hackr]

What GPU is it meant to be?

Never seen powercolor branding on the fan side of a gpu, it normally on the power cable edge.

The only way to tell what spacificlly this is, I had to google the model number that was on the label, and it showed on newegg as "PowerColor AXR9 270X 2GBD5-TDHE/OC"
Here's a link to that page: https://www.newegg.com/powercolor-radeon-r9-270x-axr9-270x-2gbd5-tdhe-oc/p/N82E16814131571
and the graphic card I own, I think it's the same:

https://imgur.com/a/6EuleQa

View: https://imgur.com/a/6EuleQa

 

[madmatt30]

The only way to tell what spacificlly this is, I had to google the model number that was on the label, and it showed on newegg as "PowerColor AXR9 270X 2GBD5-TDHE/OC"
Here's a link to that page: https://www.newegg.com/powercolor-radeon-r9-270x-axr9-270x-2gbd5-tdhe-oc/p/N82E16814131571
and the graphic card I own, I think it's the same:

https://imgur.com/a/6EuleQa

View: https://imgur.com/a/6EuleQa

So a 270x, could be 7 years old!

At which point its probably close to end of life, it may just be that the card has had it mate.
Not something you want to hear but if second hand you don't know what it's usage has been.

Try downclocking 200mhz, both memory and gpu clock.

This can be done with radeon settingsunder the tuning tab.

See if it makes any difference.

 

[teh_supar_hackr]

So a 270x, could be 7 years old!

At which point its probably close to end of life, it may just be that the card has had it mate.
Not something you want to hear but if second hand you don't know what it's usage has been.

Try downclocking 200mhz, both memory and gpu clock.

This can be done with radeon settingsunder the tuning tab.

See if it makes any difference.

By Radeon settings do you mean by loading into Windows 10 in safe mode, and checking through there?

 

[madmatt30]

No, radeon settings are the amd graphics drivers.

Theyre installed when you install the GPU if you've done it properly.

This tab here, enable manual control, drop the GPU clock and ram clocks by 10%

 

[teh_supar_hackr]

No, radeon settings are the amd graphics drivers.

Theyre installed when you install the GPU if you've done it properly.

This tab here, enable manual control, drop the GPU clock and ram clocks by 10%

Well I can't access those settings in Windows 10 because booting into it will make the screen go blank. I tested the SSD in another PC, and it boots fine. I also tried booting to a bootable OS on a disc that works fine on other PCs, but black screens after selecting the OS I want to boot.