Got new ram and monitor does not recognize it?

[milorblx]

Ok, so I bought some new ram (16gb) and it does not work when I put it in my pc and my monitor does not turn on but my pc does turn on.

New ram
https://www.newegg.com/Product/Product.aspx?Item=1X5-003Z-006T4

Old ram
https://www.newegg.com/Product/Product.aspx?Item=N82E16820239877




Specs
GTX 1050 ti
FX 6300
GIGABYTE GA‑78LMT‑S2
8GB RAM

 

[rickypratama]

Possible solutions:
1. Sometimes BIOS can't just detect new ram. Try reset your BIOS via setup, remove the CMOS battery or reset it via jumper. After that try boot with only 1 stick ram, If it display anything on desktop, just shut it down and put the other stick.
2. Is the link you provided is really match to your ram? I don't know if it affected, but your new ram appear to be "Made Specifically for Cisco UCS B230 M1 Blade Server Memory". Also your old ram is ddr3l 1600 and your new ram is slower ddr3 1333. Maybe it's compatibility issue

 

[smorizio]

the new ram is RDIMM is not the same dram as ddr3 ram. return it to new egg and get ddr3 1600 speed ram.

 

[milorblx]

the new ram is RDIMM is not the same dram as ddr3 ram. return it to new egg and get ddr3 1600 speed ram.

Would this work?

https://www.newegg.com/Product/Product.aspx?Item=9SIA7S66G15750&cm_re=ddr3_1600_16gb-_-9SIA7S66G15750-_-Product

 

[smorizio]

it should work.. to find ram that 100 percent use the ram qal guild on the mb web page or use crucial memory advisor. with newer ddr3 ram make sure it 1.5v not the lower 1.35 ram.