GPU and Memory clock error on a Zotac 1080ti amp extreme?

[GonzoSoldier]

Hi guys,

I've swapped out my Zotac 1070 amp edition for a Zotac 1080 Ti amp extreme. When I run a game I've noticed that the gpu clock reads ~1974 MHz and the memory clock 5599 MHz on the Zotac Firestorm software as well as MSI afterburner. Both these figures seem a bit high.

The temp seems stable between 70 and 80 degrees. Drivers are up to date.

My question is do I have any reason to be concerned or is it just an error with the way the card is reporting its data?

Thanks in advance.

 

[krells]

No reason for concern and no error either. The card is factory overclocked and the way GPU boost works you always end up with a higher than advertised boost clock when temperatures are under control. Your boost clock speed is perfectly normal for that card. The memory speed reported in Afterburner always needs to be doubled so you are looking at 11200 which is a 200mhz overclock over the reference design card and is also normal for the amp extreme.

 

[GonzoSoldier]

No reason for concern and no error either. The card is factory overclocked and the way GPU boost works you always end up with a higher than advertised boost clock when temperatures are under control. Your boost clock speed is perfectly normal for that card. The memory speed reported in Afterburner always needs to be doubled so you are looking at 11200 which is a 200mhz overclock over the reference design card and is also normal for the amp extreme.

That's good to know. Thanks for the quick reply.