[SOLVED] GPU cannot run properly unless PC is restarted ?

[QWERTY2234]

I recently build a new computer. At first, it didn't have any problems. But now, the first time I boot in the day usually results in a long boot time and low resolution because the GPU didn't work. For the GPU in Device Manager, it states that Windows has stopped this device because it has reported problems (Code 43). But when I restart the computer, it's a shorter boot time and everything works normally again. Also, shutting down and starting the computer after a while doesn't cause any problem. Any solution for this? Thanks.

Specs :
Motherboard : MSI MAG B460M Mortar
CPU : Intel Core I3-10105F
GPU : Nvidia GTX 750 Ti (1GB VRAM)
RAM : 1 x DDR4 8GB
PSU : Cooler Master MWE 550
Storage : 2 x HDD

 

[Metal Messiah.]

The above Error code 43 can be reported anytime when Windows does not recognize a device – whether it's a USB port, Hard drive, video card/GPU, or any other piece of hardware connected to the computer. Most of the time, error code 43 means that a device driver is either missing, corrupt, and/or outdated (so Windows has problems communicating properly with the hardware), or the hardware is faulty and needs to be replaced.

This error code points out that the Hardware might also be defective, which is the GPU. But before we jump to any conclusion, check the card on some other PC as well.

Your GPU might also be faulty, but before we jump on any conclusion, can you TEST the Video card on some other PC ? Also, are you on a FRESH Windows OS install ? If not, then try doing a clean format of your SSD/HDD, if need be. Clear and reset ALL the CMOS/BIOS settings to default.

Error code 43 is a generic message that typically indicates a problem with the hardware or software in Windows operating system. This error is often reported in Windows Device Manager. If you encounter this error with your graphics card, here are some troubleshooting ideas that may help fix it. Some of these may or may NOT apply in your case though.

1) Update your graphics card driver. Do a CLEAN re-install by using the DDU tool. https://www.wagnardsoft.com/

2) Make sure your system is updated with the latest BIOS and Windows updates

3) Check to make sure your system power supply meets the minimum recommended power requirement for your card (you can ignore this for now)

4) If your card needs additional power, make sure the PCIe supplemental power connector is plugged into the card (ignore this point as well)

5) Replace the graphics card as it may be defective

Code 43 can mostly happens either if drivers fail or the hardware fails. Other option is that your GPU or motherboard slot failed. If your motherboard has more then one PCIe x16 slot, you can move GPU to another slot to rule out motherboard failure. Or you should test GPU in another machine to confirm that problem lies in the card.

 

[QWERTY2234]

The above Error code 43 can be reported anytime when Windows does not recognize a device – whether it's a USB port, Hard drive, video card/GPU, or any other piece of hardware connected to the computer. Most of the time, error code 43 means that a device driver is either missing, corrupt, and/or outdated (so Windows has problems communicating properly with the hardware), or the hardware is faulty and needs to be replaced.

This error code points out that the Hardware might also be defective, which is the GPU. But before we jump to any conclusion, check the card on some other PC as well.

Your GPU might also be faulty, but before we jump on any conclusion, can you TEST the Video card on some other PC ? Also, are you on a FRESH Windows OS install ? If not, then try doing a clean format of your SSD/HDD, if need be. Clear and reset ALL the CMOS/BIOS settings to default.

Error code 43 is a generic message that typically indicates a problem with the hardware or software in Windows operating system. This error is often reported in Windows Device Manager. If you encounter this error with your graphics card, here are some troubleshooting ideas that may help fix it. Some of these may or may NOT apply in your case though.

1) Update your graphics card driver. Do a CLEAN re-install by using the DDU tool. https://www.wagnardsoft.com/

2) Make sure your system is updated with the latest BIOS and Windows updates

3) Check to make sure your system power supply meets the minimum recommended power requirement for your card (you can ignore this for now)

4) If your card needs additional power, make sure the PCIe supplemental power connector is plugged into the card (ignore this point as well)

5) Replace the graphics card as it may be defective

Code 43 can mostly happens either if drivers fail or the hardware fails. Other option is that your GPU or motherboard slot failed. If your motherboard has more then one PCIe x16 slot, you can move GPU to another slot to rule out motherboard failure. Or you should test GPU in another machine to confirm that problem lies in the card.

I somehow managed to fix it by unplugging the power cable and holding the power button for 30 seconds. Anyways, Thanks for your help.