GPU Fans Working, Still No Display

[6hafariz]

First, this is my spec :
intel g4560
rx 560 2gb (no pin needed)
msi b250i pro
2x4 vgen tsunami ram
enermax naxn 500w
ssd 250gb

i just build my first pc, and i just bought a LG 24MP88 monitor and there is a HDMI included. first i plug it to the VGA (rx560) but no display, and then i try to plug it to motherboard, but its working! a display that i expected, and then i try to figure it out, try to install AMD DRIVER, and yeah, installer says "no hardware found", obviously because im not plugged it to vga. BUT, when i go to www.amd.com/support, it shows that my vga is rx560, so they detect my vga

the problem is = fan working, no display from vga
is there any solution for my problem ? thx..

 

[scout_03]

could you test this gpu in another system to see how it is detect and if you could install driver for it .

 

[6hafariz]

could you test this gpu in another system to see how it is detect and if you could instal driver for it .

i dont have any other system/motherboard 🙁 this is my first pc

 

[scout_03]

no friend or family around that could help you on this .

 

[6hafariz]

no friend or family around that could help you on this .

my friend dont know the solution, my family.... yea they dont know anything about pc

 

[rodolphe.viard]

Hi 6hafariz,

in the bios you should have an option to force the GPU to be the first choice.


Rodolphe.

 

[6hafariz]

Hi 6hafariz,

in the bios you should have an option to force the GPU to be the first choice.


Rodolphe.

there is an option IGD and PEG, IGD means integrated Graphic Device, after i searched on google, i found that i have to switch it to PEG, i already done it, but still.. nothing

 

[scout_03]

ask you friend only to put the gpu in is system to see if you have video from it even without is driver it will work on generic from os .

 

[6hafariz]

ask you friend only to put the gpu in is system to see if you have video from it even without is driver it will work on generic from os .

i already put the gpu to the system from the beginning, even when i plug the hdmi to motherboard, my gpu still attached

 

[scout_03]

if you want video from gpu hdmi should be plug to it and not the onboard .

 

[6hafariz]

if you want video from gpu hdmi should be plug to it and not the onboard .

read my threa pls, i already said that i plug it to vga first but no display -_- then i plug to motherboard just to make sure everything beside vga is fine

 

[scout_03]

that why i ask you to test it in another system board slot could be defect or gpu .

 

[Ron_30]

Looking at the card it has display port, hdmi & dvi. I am confused with your use of VGA as neither the card or motherboard has that connector. Unless I am mistaken can you be more specific.

 

[6hafariz]

that why i ask you to test it in another system board slot could be defect or gpu .

as i said before, i dont have any other system

 

[6hafariz]

Looking at the card it has display port, hdmi & dvi. I am confused with your use of VGA as neither the card or motherboard has that connector. Unless I am mistaken can you be more specific.

i mean VGA = graphic card, input that i used is HDMI