- Mar 3, 2015
- 5,965
- 690
- 46,890
I just built my first system in a long time. I have a EVGA 1070 GTX that has one 8 pin connection. I also have a EVGA Supernova G3 PSU. I used the supplied PSU labeled "VGA" 8 (6+2) cable to power my card. Is this correct?
Its been a long time since I built a system, like back when IDE was still common place so I just want to confirm.
Also have a question about my front IO lights, i have a Asus Z270F and was wondering if I put the cables in correctly? like 90 percent sure i did but I was a bit confused on the orientation and labeling
Heres a picture:
https://photos.app.goo.gl/tK19nUhLdIlfnCRq2
Its been a long time since I built a system, like back when IDE was still common place so I just want to confirm.
Also have a question about my front IO lights, i have a Asus Z270F and was wondering if I put the cables in correctly? like 90 percent sure i did but I was a bit confused on the orientation and labeling
Heres a picture:
https://photos.app.goo.gl/tK19nUhLdIlfnCRq2
Facebook
Twitter
Instagram