Gpu sag problem

[sergiuskater]

Is this gpu sag?If it is should i worry about it?
https://imgur.com/gallery/TPPAg

Ps: sorry for the flashy pictures

 

[CropEditPaste]

Hard to tell from the light, but all GPU's really do that. I wouldn't worry about it now, but later i'd consider a bracket.

 

[atljsf]

without the flash and the panel, perhaps we could see

no idea how it is now, sorry, bad image

 

[scout_03]

made shure it is well seated in the pci-e slot and that the holding screw in the case is as the right position and tight .

 

[bailojustin]

may be ghetto, but for my oldest card, a r9 280 dual-x sapphire, it had no back plate and was very heavy and sagged, So I got a piece of insulated cabling and attached it through the GPU screw holes, there should be one on each corner and attached the other end to the top of the case, to tighten it i used a stick/pole like you would with a turnicate and slowly turned it till my card was lifted.

 

[atljsf]

even more gheto is just a stick, long enough to push up the back of the gpu

there, i fixed it 😀

 

[bailojustin]

That is golden atljsf! haha I have to show this now, and by the way, the wire is also connected to a lcd temp readout, its a thermistor on the tip 😉

 

[atljsf]

a combo then!