GPU Upgrade for Inspiron 560

[Drop That Ammo]

Hi I was just wondering quickly if anyone could find the size of gpu that can fit into the inspiron 560 case. I cannot find dimensions anywhere. I am planning on getting a card that is 5.9" x 4.38" x 0.74". If anyone knows if this will fit or can find the dimensions of the slot, please respond. Thanks.

 

[rgd1101]

If you have the dell. get a tape measure and open it up

 

[clutchc]

If this is your Dell: http://cnet2.cbsistatic.com/hub/i/r/2010/08/03/0656c06d-67c4-11e3-a665-14feb5ca9861/thumbnail/770x433/2803e00e28ef789469f783c108629d24/33968317-2-1333-OVI-4.jpg
...any card as short as 5.9" long should fit easily. But as rgd1101 says, open the case and measure. So simple. You have to open the case to install the card anyway...

 

[k1114]

You can fit any card less than around 13" in length which would go under the hdd if longer than about 9.6". That's pretty much any card on the market but you'd be limited by the psu unless that is upgraded. We only talk length because height only has 2 options, low profile or full height and you have full height as with any tower that's not slim. Width is number of slots. Usually low end cards are 1 slot, higher are 2 slots. You have 4 slots unless you have a wireless card than that would give you 2 from the pcie x16 slot. Is it the 6670 you mentioned in your other thread?