Graphics Card and PSU spins, but no display

[Andrew_Liew]

Hi everyone,
I installed some components into my computer, but encountered some problems. I installed my GPU but when I powered on the computer, the GPU spun without any display. I'm not sure why this is happening. I tried turning off onboard graphics, and then installing the gpu, but that didn't really help. I think I may have heard the computer beep, but still no display.
Here are the specs:
Intel Core i5 4570 (3.20 GHz)
8 GB DDR3 1 TB HDD
NVIDIA GeForce GTX 760
CX750
When I try connecting the monitor to the GPU nothing happens but when connecting to the motherboard it works fine.

This problem has plagued me for quite a while, so any help would be greatly appreciated.
Thanks!

 

[Firecheetah13]

First, check if your VGA EZ Debug light is on after POST. If it isn't, check that you don't have a bad cable. Try other ports too, maybe you will have some luck. As a side note, make sure your male connectors are in all the way.