Graphics card help needed

seniorpaul

Distinguished
Aug 13, 2003
2
0
18,510
I've posted a couple of times here regarding the computer i was building (which happened to be the first computer i built myself).

First off, here's what i ended up with....

Asus P4C800-E Deluxe motherboard
Intel Pentium 4, 3.0 ghz, 800mhz FSB
WesternDigital 160gig HD
1 gig Corsair XMS DDR400 ram
Asylum FX5900 Ultra 256mb AGP card
cd burner

my question is regarding the AGP card. When i check the display properties tab, under the adapter information section it says that my card is running in PCI mode. Asus also has a program called PCProbe(or something close to that), and it says that my AGP isn't being used. I've updated all the drivers for my MOBO and graphics card, and i've checked around in the BIOS, but haven't been able to get my video card working properly. Any help would be greatly appreatiated.
 

Caimbeul

Distinguished
Jul 4, 2003
378
0
18,790
Do you have an on board/integrated graphics card on the Motherboard??. Go into the BIOS and make sure it is not enabled.

<i>Mmm Dawn AND Eve at the same time...Drroooooll
-------------------------------------------------
<b>XP2100+, 1Gb RAM, ASUS A7N8X, PNY 64Mb Ti4200. :cool:
 

TTZX

Distinguished
Jul 18, 2003
214
0
18,680
Is this what it says?

Location: PCI bus 1, device 0, function 0



_ _ _ _ _ _ _ _ _ _ _ _ _ _
P4 2.4C @ 3.0GHz 1.525V Stock HSF
Abit IS7 BIOS v1.3 GAT Auto
Corsair XMS 512MB TwinX3200C2 2-3-3-6
GeForce4 Ti4200 AGP8X 128MB
Seagate Barracuda 80GB SATA