Graphics Card Looks AWFUL Compared To Vga Or Dvi

TechFreak2516

Honorable
Nov 2, 2013
117
0
10,680
Hello there so i have a evga geforce gtx 750 ti and i have an hdmi cable going to this sharp aquos tv...Model number:sharp lc-c4067u and the image looks so much worse compared to when i plug vga or dvi to the tv.It is really "grainy" and all the text has this reddish and bluish look to it,i have images here:
this one is on hdmi:http://postimg.org/image/l6vna3lxn/
and this one is both tried dvi and vga:http://postimg.org/image/6mekf9qyz/

and i have tried MANY different hdmi cables and different tv's and all different pc's,and different graphics cards too...I just wanna know if it is something i can do to fix this,and i don't recall what other graphics cards i've tried.But i really wanna fix this quality issue,thanks :)
 

gokitty199

Honorable
Feb 4, 2013
1,398
0
11,660
first off your hdmi bad picture is zoomed in much further than your dvi/vga. check and make sure the resolution is set to your monitors native resolution, assuming your monitor is 1080p, set the resolution to 1920x1080.
 
Hello... The Sharp Aquos I use the last HDMI input (6) as recomended... and there are different color and PC/gamer modes with that input, (check your manual for recomended PC use and resolution settings)... I have a great Picture at 1080P 60HZ video output and TV input.

Color is another issue... I have the procedure to boot into the TV and customize the color setting for anyone of the color presets... this was the Game changer for best possible picture.
 

TechFreak2516

Honorable
Nov 2, 2013
117
0
10,680


Ok yes that is true but only because i was lucky on the first to not be THAT blurry...And yes both are set to native resolution.And the other monitor looks GREAT,it's just this tv i need to figure out :p
 

TechFreak2516

Honorable
Nov 2, 2013
117
0
10,680


That's the thing though,should i use input 8?i am using 6 right now...And also what's interesting is i just set the display so everything is LARGE,and damn well it is :) and it fixed the issue but i don't like it this big,when i go back it's back to the annoying bitch it is...
 
Hello... the manual is well written for mine... it has a chart for settings listed... DL yours.

Your Tv/remote will let you manually switch input settings... try them all out... but read the words for a faster solution.

I can Play StarCraft or Share my game in another Room on mine, and the color/Look matches my Monitor... But you will never get a clear, detailed, close range visual performance with it.

How long is your HDMI cable run?
 

TechFreak2516

Honorable
Nov 2, 2013
117
0
10,680

that's the thing,cause i just hooked mine up to 8 and it looked like SHIT.i had to go under geforce control panel and edit the resizing,and now the resolution doesn't even look right.I don't know what to do right now :( i read the manual and it just doesn't make anysense to me....
http://files.sharpusa.com/Downloads/ForHome/HomeEntertainment/LCDTVs/Manuals/tel_man_LCC4067UN.pdf
 
Hello... I KNOW!!!! you need to set it 16:9 on both your TV and Video card... the HDMI cable may be switching OR Displaying the input aspect ratio to 16:10? as the VGA and DVI would not have the option... This is the magnification illusion between the pictures.
 

TechFreak2516

Honorable
Nov 2, 2013
117
0
10,680


I haven't tried that,should i probably disbable the resizing and try that out? :)
 

TechFreak2516

Honorable
Nov 2, 2013
117
0
10,680


each and every time with different cable it will show 1080p and hdmi for different inputs as well