Graphics card not detected by windows 10

[DanTheMan20017]

Hi guys, recently i have reset windows 10 after cloning issues with my SSD which caused my windows 10 to become corrupt. After the fresh installation, i couldn't open any game as it said DX11 feature level 10.0. I have researched it and i have discovered that windows 10 doesn't detect my graphics card as on the device manager it says 'Microsoft Basic Display Adapter'. Also, i have found that i no longer have the option to go into the Nvidia control panel unlike before as it was there.

When i try to install any driver, it just fails for some unknown reason

Any suggestions on what i should do?
Thanks

 

[Shektron]

Go into the BIOS, make sure the Primary Display Adapter is set to PCI-E, not anything else.

If that doesn't work(upon rebooting), then remove the GPU, connect the monitor to the motherboard video port and boot up. Then turn it off again, re-insert the GPU, and connect the monitor to the GPU again. Try booting now.

 

[DanTheMan20017]

Go into the BIOS, make sure the Primary Display Adapter is set to PCI-E, not anything else.

If that doesn't work(upon rebooting), then remove the GPU, connect the monitor to the motherboard video port and boot up. Then turn it off again, re-insert the GPU, and connect the monitor to the GPU again. Try booting now.

Have just tried this, didnt work

 

[Shektron]

Do the fans on the GPU spin up when the PC is running? Did you make sure the power connectors, if needed, are connected securely? And is the GPU sitting firmly in the slot?

Install DDU, boot into safe mode and remove all the display drivers you have, using DDU. Then try installing the latest drivers from Nvidia again.

http://www.guru3d.com/files-details/display-driver-uninstaller-download.html