Graphics card test

May 15, 2018
12
0
10
520/620w seasonic power supply vs EVGA 600 B1


I need to upgrade my CPU in order to run a GtX 1050Ti. I will use it mostly flying War Thunder using a HP 8200 tower i5 2500 3.3ghz 8g ram
Will the power supplies below fit & be able to run the program?
520/620w Seasonic power supply vs EVGA 600 B1 ?

Thank you for your time.
Dino
 
May 15, 2018
12
0
10


Thanks for the quick reply.
What CPU would you install to be top notch?
I'm a noob & appreciate your tips especially that SeaSonic is old hat but still survives. Is there a "sweet" EVGA that would make this HP run smooth?

Thanks.
 

No. HP uses proprietary non standard PSUs with 6-pin and 5-pin power connectors instead of the standard 20-pin and 24-pin ATX power connector found on those PSUs.
I don't know if you have taken a look at the PSU and the connectors in the HP 8200.




 

DSzymborski

Curmudgeon Pursuivant
Moderator


Your current CPU is likely fine. There's the possibility of getting an i7-2600, but you may not need it.

The larger concern is that HP uses a *lot* of proprietary power supplies. This may be one of those cases in which hp's forums may be more helpful.

 
May 15, 2018
12
0
10


 
May 15, 2018
12
0
10
 

DSzymborski

Curmudgeon Pursuivant
Moderator


Case too as I believe that the motherboard in there is a BTX.
 
May 15, 2018
12
0
10
Yikes.! Something tells me I bought the wrong computer.
As a noob in the computer guts repair, is it better to bring it to a shop?
Computer for Dummies?
I love the challenge but I know one wrong wire is lites out.
Though everything has only so many places to go so I guess I can figure it out as I look at it.
 
May 15, 2018
12
0
10


I'll call the manufacturer in Houston to find out from the horses mouth.
What is the apparent setback if it's a BTX MB?
Thanks for the needed skinny on getting this graphics card compatible.
 

DSzymborski

Curmudgeon Pursuivant
Moderator


The problem with BTX is that it was a form factor intended, about 15 years ago, to eventually replace ATX, but it never caught on. If your case houses a BTX motherboard, it means you're not going to be able to just re-use the case with a new motherboard, which will invariably be some variant of ATX.