Graphics card wont fit

[dabbindinosoar]

What do i do if my graphics card doesn't fit in between the motherboard and the case there is nothing else blocking it

 

[dontlistentome]

It sounds like maybe your case, whatever it is, uses a low profile card and you have a full height card. With the almost nonexistent information you provide it's tough to say more.

 

[dabbindinosoar]

It sounds like maybe your case, whatever it is, uses a low profile card and you have a full height card. With the almost nonexistent information you provide it's tough to say more.

Its a Coolermaster k380 + gtx 710

 

[marcus134]

What do i do if my graphics card doesn't fit in between the motherboard and the case there is nothing else blocking it

you have to remove the metal thingy that hold the metal thingies, remove one of those thingies that is in front of the pcie slot you want to use, then slide in your card and put back the metal thingy

which is as poorly detailed in the manual page 3 step 2.4
http://www.coolermaster.com/xresserver01-DLFILE-P1302180529d850-F1303060026104d.html

 

[Wolfshadw]

Are you removing the retaining plate as outlined in the case manual section 2.4? Are all of the spacers in place?

-Wolf sends

 

[dabbindinosoar]

Are you removing the retaining plate as outlined in the case manual section 2.4? Are all of the spacers in place?

-Wolf sends

Yup done all that

 

[Wolfshadw]

I'd recommend posting an image of the issue so everyone knows exactly what the issue is.

-Wolf sends

 

[marcus134]

did you place the stand-off before installing your motherboard?
does your card have a low profile bracket or a full height bracket?
http://heelpbook.altervista.org/wp-content/uploads/2015/04/3884_bracket.jpg

 

[dabbindinosoar]

Nvm i underestimated how much force was needed to push the thing in