Graphics card won't go in all the way on one end help!!!

Sep 10, 2018
1
0
10
Hey there so I just bought a new graphics card for my PC since I was looking to upgrade. The card is roughly the same size as my old one and I have plenty of room for it. So I unscrewed the brackets the card slides into to help keep it in place and as I am pushing the card in and it only seems to want to go in on one side, that side being where the nudge of the card clips onto the pci bracket. I don't know why it's doing this I've tried pressing down but the one end will not go any further.
 
Solution
You have to make sure card is lined up with pcie slot make sure that it's squared up as you GENTLY push the card in till it snaps the clip in place. You should not have to force it if card is line up correctly. If your old card came out, your new card can go in. Take your time and try not to get frustrated as your doing it, I have found that working on pc's when I'm mad is not good. Anyway, good luck
You have to make sure card is lined up with pcie slot make sure that it's squared up as you GENTLY push the card in till it snaps the clip in place. You should not have to force it if card is line up correctly. If your old card came out, your new card can go in. Take your time and try not to get frustrated as your doing it, I have found that working on pc's when I'm mad is not good. Anyway, good luck
 
Solution