I just upgraded my cross hair v formula z with a fx 9590 to gskill ripjaw 2x8gb1600 10 10 10 30. I went into bios and turned on the docp and selected 1600 this resulted in stuttering and then eventually a freeze 30 seconds after log in. I then selected the profile that had the name of the ram in it and that resulted in a blue screen. I have it set in manual mode and set to 10 10 10 30 and cpu z says it's 10 10 10 28 it works like this though. It works if I turn the ai profile off and cpu z says it's 11 11 11 28 and dual channel. Do I need the ai profile on or just leave it in auto?