Question Gtx 1050 oc edition

[sa.ceggm]

Hello. Am wondering if this card would fit my case/motherboard. I saw that this card requires H=36 L=191 W=111 mm. Whereas my single slot PCIe x16 isH=111.15 L= 167.65. And for the case H=360 W= 175 D=417.
I've got a dell optilex 3010 mini tower case with a 042P49 motherboard

 

[rolli59]

Should fit shorter than a std width ATX motherboard

 

[sa.ceggm]

Sorry i didn't understand that one

 

[clutchc]

Which card exactly? Need make/model. Or post a link to it. Some Dell Optiplex MT have their SATA headers in a bad location for anything but very short cards. I have one (Optiplex 9020)

 

[rolli59]

Sorry i didn't understand that one

depth of the case is more than twice the length of the card. The motherboard is mATX and the card is not going to overhang it (because of the width of the board is greater than the length of the card). So if the board fits the case the card will!

 

[sa.ceggm]

Here is the Card.

depth of the case is more than twice the length of the card. The motherboard is mATX and the card is not going to overhang it (because of the width of the board is greater than the length of the card). So if the board fits the case the card will!

Won't this ram cause any trouble as its in the card's way?

 

[sa.ceggm]

I really need this fast so anyone?

 

[rolli59]

Ram slots are just above the card position and should not interfere.

 

[clutchc]

Looking at your photo, it looks like there will be no problem. The RAM will sit above the card's body and not be in the way. The SATA ports on that model board sit far enough down that they won't get covered up by the card either. You're good for any non 6-pin GTX 1050/1050 Ti you want to get.

Might be time for a little house cleaning though