GTX 1050 Ti Recognized in Device Manager but No Signal

[Evan_41]

Hi, I'm having trouble installing my GTX 1050 TI.
- Getting no signal on the monitor
- Fan is spinning, it seems to be powered thru the PCI slot
- Installed latest drivers from Nvidia, card shows up in device manager (when I am using onboard gfx to debug)
- Old AMD card works fine in the same slot, same cable, same monitor. (I did already clean out the old AMD drivers)
- Have BIOS display setting set to 'Auto', with this card installed and onboard hooked up, it won't default back to onboard so I think it is trying to use the gfx card. Switching this option to PCI doesn't solve the problem
-BIOS version F7, I think version F3 is the min requirement

Not really sure where to go from here, possible defective card, but does anyone else have some insight? Can provide more details on request.

 

[The_Staplergun]

Use DDU to uninstall the old AMD drivers properly, and also run it again to uninstall all nvidia drivers. Then install new drivers.

 

[Evan_41]

I'll try to reclear and reinstall the drivers. What I get now is that the system will not progress past the BIOs splash screen. Is a BIOs update in order?

 

[Jomgu1]

Motherboard? PowerSupply?, In other PCI-Express?, Put your last correct GPU and change BIOS display to GFX1 or PCIE1x16 where your GPU is

Try installing in order BIOS, and lastest INTEL or AMD chipset motherboard Drivers and try another time, if not maybe your motherboard doesn`t support that GPU or there is a problem already in GPU...