Gtx 1050ti pentium G620 low fps

[Sathvick]

my comp..
intel pentium G620
6gb ram
gtx 1050ti 4gb
before i used to gte around 20 to 50 fps with my geforce 210
now after upgrading to a gtx 1050ti my fps is around less than 40
i think there is some settings problem which i am not able to identify....

anyone pls help....

 

[Sm0k]

The main problem there is your CPU, an Intel Pentium dual-core (Sandy Bridge)with no turbo Boost, no hyper-Threading is holding back the performance on your new 1050Ti.

Solution, upgrade your CPU to a newer Skylake or Kaby Lake CPU

Edit: Plus a 8GB of ram will help a bit

 

[Sathvick]

no thats not it before this graphic card i used to get around 50-60 fps....now it is less than 30

 

[Sathvick]

i have even seen videos that this graphic card is way more powerful....it should at least show performance in cpu less intensive games..

 

[Sm0k]

Which games?

 

[Sm0k]

That card is capable of deliver great performance but the rest of the components must be at the same ¨level¨ in order to unleash the whole power of that GPU

 

[Sathvick]

thats not the problem man and i know it....

 

[Sm0k]

If you are so sure about that, then try making a clean install of your GPU driver, you can use guru3D utility (Driver uninstaller) to completely clean the current drivers, also check your CPU temp´s (you can use Hwmonitor for that).

http://www.guru3d.com/files-details/display-driver-uninstaller-download.html

http://www.cpuid.com/softwares/hwmonitor.html

 

[TMTOWTSAC]

The first thing people usually ask is if you removed all your old drivers for the 210. DDU is often recommended, then reinstalling the new card. The second is to ensure all components (CPU, GPU) are running at their correct speeds. Finally, check to see if any in-game settings have changed going from one card to the next.

 

[Sathvick]

i even checked the temps the cpu does not go over 50 degrees and the gpu doesnot og above 20 to 30 degrees

 

[Sm0k]

i even checked the temps the cpu does not go over 50 degrees and the gpu doesnot og above 20 to 30 degrees

And drivers, did you make a clean install with the new GPU?

 

[BFG-9000]

Surely you've noticed the games look better on the DX11 codepath which requires more work from CPU and GPU.

If you force the game to run in DX9 codepath like before you'll probably get your FPS back

 

[Sathvick]

one more thing is i can play nfs rivals in ultra 30 fps....wtf

 

[Sathvick]

i think that it is just that in cs go there is fps loss

 

[BFG-9000]

Counter-Strike: Global Offensive lists DX9 as a minimum and DX11 as recommended, so has codepaths for both.

The heavier load on the CPU from the DX11 path means Source Engine defaults to 3 threads, although you can specify 4 (with -threads 4). This doesn't help you with your 2-thread CPU so drop to DX9 mode.

 

[Sathvick]

i have seen many videos and it can still play cs go at least 100fps..min