GTX 1070s SLI in a Carbide Spec 03

[EngreeNovaFR]

Hello, I actually have a Asus strix gtx 1070 and I want to get another one to make an sli, but the problem is that I don't know if the sli will fit in my case, a corsair carbide spec-03 (led). My 1070 fit well into the casearch by I don't know about the other. Does someone have this specs or know if it fit ?

 

[Zerk2012]

open the side of the case and look. look at where your other slot is and if the card will fit or not.

 

[EngreeNovaFR]

open the side of the case and look. look at where your other slot is and if the card will fit or not.

I actually don't know where the second slot will be as I don't have the motherboard I will use with the sli

 

[Zerk2012]

In general if you have 3 slot spacing for SLI (as you should for cooling so their a bit of room between the cards) it will put the 2nd card at the hard drive bay in that case. So if your top card is not hanging over the hard drive bay your fine if it is then you will need a new case (I would get one with intake dust filters) or cut part of the drive bay out.
Instead of buying a new board and card I would consider using the board you have selling your card and buying a GTX 1080 or waiting a few months till the new cards come out. ( 1080ti and the upper end AMD cards should be out soon)