GTX 1080 artefacts

[raterik510]

I am getting some artefacting on my gtx 1080 from gigabyte(windforce edition),i applied the OC profile in the aorus engine.
The artefacts appear only for a few seconds verticallly or horizontally...but not all the time,it is pretty random.
It doesn't stay on the screen at all...just for a few miliseconds.
Is it something normal or I should worry about it ?

 

[richiestang_78]

Turn off the overclock and see if they appear. If they dont think your overclock is unstable.

 

[raterik510]

I'll turn it off,but i didn't do anything manually...i just set it to oc profile.

 

[Caleb Hale]

Is this a new card you just installed?
What PSU are you running?

 

[raterik510]

Turn off the overclock and see if they appear. If they dont think your overclock is unstable.

Is this a new card you just installed?
What PSU are you running?

 

[raterik510]

It's not that new i bought it like ~3 months ago , the power supply is an seasonic focus+ 650W Gold fully modular.

 

[dextermat]

monitors your temps and voltage auto overclocking software could kill your card if not monitored properly.
I had a program that even if I selected a fan curve, it would be ignored and defaulted to quiet.
The temps would hit 90 degrees and fan spin only minimal.

 

[raterik510]

monitors your temps and voltage auto overclocking software could kill your card if not monitored properly.
I had a program that even if I selected a fan curve, it would be ignored and defaulted to quiet.
The temps would hit 90 degrees and fan spin only minimal.

 

[Caleb Hale]

Unless your PSU is going out on you it sounds like it just doesn't like the OC profile.

Try to lower your OC settings manually.

***WARNING*** - You could possibly damage your hardware by increasing voltage manually!
You could also try bumping the voltage to the GPU in the smallest increments allowed to see if it clears them up.

 

[raterik510]

Everything was looking fine to me...the gpu temps would not go higher than 80° on the oc profile.
What voltages should i see at stock clock speeds ?

 

[TJ Hooker]

monitors your temps and voltage auto overclocking software could kill your card if not monitored properly.

It's not auto overclocking software in the usual sense, it's just applying the factory overclock that the card is rated for.
https://www.gigabyte.com/Graphics-Card/GV-N1080WF3OC-8GD#kf
"OC Mode"

 

[raterik510]

Removed the oc profile,now i think that the card is running stock settings...but i am getting the same artefacts and now also black screens...