GTX 550 ti wrong pixel filter rate

[GL999SIX]

Hello,
I recently purchased a Nvidia GTX 550 ti(with GPU clock 900 MHz).As it has 24 ROPs it should have a pixel fill rate of 21.6 Gpixels/s but GPU-z is showing 1/3 of its(7.2 Gpixels/s)...heres the screenshot..

Is this a problem with my Graphics Card or with the software GPU-z.

 

[rolli59]

Probably a software problem. The program might be calculating it with the GPU on idle.

 

[millena300]

same as mine. 😱 how can i fix the program. i mean the gpu - z. how i will fix this?

 

[Guest]

try a newer version. click on the little question mark and see if it changes. it brings up a furmark sort of thing to check it at full load.

 

[Guest]

i was using version 0.6.4 and i noticed the wrong pixel rate on my 570 superclocked. as i changed the core clock, the pixel rate was alway 1/2 the texture rate. Luckily i had some older versions on my flash drive, so I install version 0.5.4 and it reads correctly.

 

[Guest]

Hello,
I recently purchased a Nvidia GTX 550 ti(with GPU clock 900 MHz).As it has 24 ROPs it should have a pixel fill rate of 21.6 Gpixels/s but GPU-z is showing 1/3 of its(7.2 Gpixels/s)...heres the screenshot..

Is this a problem with my Graphics Card or with the software GPU-z.

ANY GPUZ PAST 0.5.4 REPORTS THE WRONG PIXEL RATE ON FERMI CARDS. USE 0.5.4. 0.5.5 MIGHT WORK.