Hello Everyone :3
First off, this is my setup
MB: GA-78LMT-S2P
RAM: 2x4GB 1333mhz ddr3
CPU: FX6100 @stock "with cores 5 and 6 disabled"
PSU: Corsair VS 450 watts
HDD: Seagate 1TB
I was using a GTX1050 a few months back but had to sell it and was using an old HD6670 during that time, I Got an "EVGA GTX760 SC" from a friend today and installed the latest 419.67 drivers
but whenever I try something with a 100% load, I keep restarting about a minute or two in, the card was tested on my friend's PC and it was working fine
I know it requires 500watts on EVGA's website, but everyone told me 400 or 450 watts should be more than enough
and if my approximations are accurate I can't be using more than 320~350 watts
First off, this is my setup
MB: GA-78LMT-S2P
RAM: 2x4GB 1333mhz ddr3
CPU: FX6100 @stock "with cores 5 and 6 disabled"
PSU: Corsair VS 450 watts
HDD: Seagate 1TB
I was using a GTX1050 a few months back but had to sell it and was using an old HD6670 during that time, I Got an "EVGA GTX760 SC" from a friend today and installed the latest 419.67 drivers
but whenever I try something with a 100% load, I keep restarting about a minute or two in, the card was tested on my friend's PC and it was working fine
I know it requires 500watts on EVGA's website, but everyone told me 400 or 450 watts should be more than enough
and if my approximations are accurate I can't be using more than 320~350 watts